Part No. |
Motor
Parts, Lower End |
Price |
23960-29 |
Crank pin; all 45 |
30.00 |
23961-41 |
Crank pin; FL 1941-81, also UL stroker (1¼"
straight) |
39.00 |
23962-40 |
Crank pin; UL 1940-48 & EL 1940-52 (stepped),
also 1937-39 with late brgs. |
45.00 |
23972-21 |
Flywheel thrust washer; all 45 (next to rods, inside
flywheels) |
4.50 |
23985-12 |
Shaft key; all 45 & UL (motors use 2), NOS |
2.50 |
7974 |
Nut, sprocket & pinion shaft; all 45; for safety,
these should be new when building a high- performance motor (motors use
2) NOS |
3.00 |
24000-29 |
Sprocket shaft; all 45 |
39.00 |
24001-30 |
Sprocket shaft; all big twin 1930-54, including VL,
UL, knuck & panhead EL & FL |
34.00 |
24005-37 |
Pinion shaft; all 45 |
62.00 |
24006-37 |
Pinion shaft; all UL |
59.00 |
24011-37 |
Pinion gear; all 45, excellent used condition, when
available |
10.00 |
24015-36 |
Lockplate; UL sprocket & pinion shaft nuts, NOS |
1.00 |
24290-32 |
Connecting rod pair; all 45 1932-73, bare (no races or bushings) |
90.00 |
24300-36 |
Connecting rod pair; OHV big twins 1936-73 (knuckle, pan, and
shovelhead 61 & 74"), includes both rods, races & wrist-pin
bushings (must be fitted to your 1¼" crank-pin). Notes:  |
100.00 |
24340-29 | Connecting rod race set; all 45, for both rods, 3 pcs. |
23.00 |
24340-36A |
Connecting rod race set; all big twin 1936-*, for
both rods, 3 pcs. |
22.00 |
24370-29 | Crank-pin roller set; all 45, std. |
22.00 |
24371-29A |
Crank-pin roller set; all 45, specify size: +.0006,
.001 | 24.00 |
24385-40A |
Crank-pin roller set; all big twin 1940-72 (steel
cages), std. |
22.00 |
24585-39 |
Right main bearing race; 45 1939-73 |
35.00 |
413-36 |
Right main bearing race; UL 1937-39, EL 1936-39 (insert
type) |
40.00 |
24595-40 |
Right main bearing race; UL 1940-48 (snap-ring type) |
34.00 |
24610-39 |
Left main bearing race; 45 1939-73, NOS |
35.00 |
416-36 |
Left main bearing race; UL 1937-39, EL 1936-39 (insert
type) |
40.00 |
24621-40 |
Left main bearing race; UL 1940-48 & OHV big
twin 1940-54 (snap-ring type) |
35.00 |
24646-36 |
Right main roller retainer; all UL, each (motors use 2) |
16.00 |
24691-39 |
Washer; 45 left main brg. (between seal & rollers),
NOS |
3.50 |
24692-39 |
Washer; 45 right main brg., NOS |
3.50 |
24701-39 |
Retaining ring, bearing; all 45, goes inside main races |
1.50 |
24720-29 |
Left main roller retainer; all 45, NOS (motors use
2) |
6.00 |
24721-30 |
Left main roller retainer; all UL, each (motors use 2) |
16.00 |
9241/12 |
Right main roller set; 45 1937-54 (fits 1955-73 with
no changes), specify size: std., +.0002, .0006, .001" |
10.00 |
9261/12 |
Right main roller set; all UL, std. |
9.00 |
9220/24 |
Left main roller set; all UL, std. |
13.00 |
9321/24 |
Left main roller set; all 45, specify size: std.,
+.0006, .001" |
15.00 |
24023-36 |
Nut; sprocket & pinion shafts, all UL, each |
3.00 |
24775-39 |
Sprocket shaft seal; 45,1939-73, original NOS metal
type |
8.00 |
24775-39C |
Sprocket shaft seal; 45, 1939-73, improved O-ring
type, with snap ring |
16.00 |
24776-40C |
Sprocket shaft seal; UL 1940-48 (also 74 OHV 1940-54),
with snap ring |
16.00 |
24790-37* |
Motor mount bolt set; all 45, includes all special
bolts, washers, castle nuts, etc. to mount cases to frame, cadmium plated |
22.00 |
4080 |
Crankcase bolt; all 45, NOS (motors use 2) |
2.00 |
7691 |
Oil pump nut; all 45 & UL (also 74 OHV), special
¼-24 thread, NOS |
.50 |
2341 |
Cam cover screw; all motors, special ¼-24
thread, NOS |
1.00 |
24801-37* |
Motor case bolt set; all 45, includes all studs,
nuts & washers holding your cases together, cadmium plated, 17 pieces |
21.00 |
24802-37* |
Motor case bolt set; UL 1937-39, same as above, 34
pcs. |
31.00 |
24802-40* |
Motor case bolt set; UL 1940-48, same as above, 34
pcs. |
31.00 |
24975-37 |
Crankcase oil strainer; all 45 & UL (in floor
of cam chest) |
5.00 |
24975-75K |
Crankcase oil strainer kit; includes strainer, new
pin & gasket, all 45 & UL |
6.50 |
Part No. |
Roller Bearings Sold by Size. These are 100 rollers of one size only, and are not returnable or exchange- able. Please do not ask what they fit - that's up to you. If we don't have the exact size you requested, the next larger size will be shipped unless you specify otherwise. |
Price |
9241/100 |
Roller bearings; .250" diameter × .550" long, specify size: std., +.0002, +.0004, +.0006, +.0008, +.001, +.002, +.003" |
30.00 |
9301/100 |
Roller bearings; .250" diameter × .270" long, specify size: std., +.0002, +.0004, +.0006, +.0008, +.001" |
26.00 |
9321/100 |
Roller bearings; .250" diameter × .360" long, specify size: std., +.0002, +.0004, +.0006, +.0008, +.001" |
30.00 |
9220A/100 |
Roller bearings; .250" diameter × .490" long, specify size: std., +.0001, +.0002, +.0003, +.0004, +.0005, +.0006, +.0008, +.001, +.002" |
25.00 |
9261/100 |
Roller bearings; .250" diameter × .600" long, specify size: std., +.0002, +.0004, +.0006, +.0008, +.001" |
27.00 |
9281/100 |
Roller bearings; .250" diameter × .726" long, specify size: std., +.0006, +.001, +.002" |
30.00 |
16A15/100 |
Roller bearings; .250" diameter × .305" long, specify size: -.0005, -.0001, std., +.0005, +.001" |
30.00 |
9421/100 |
Roller bearings; .1875" diameter × .800" long, specify size: std., +.0002, +.0004, +.0006, +.0008, +.001" |
25.00 |
9101A/100 |
Roller bearings; .1875" diameter × .329" long, specify size: std., +.0002, +.0004, +.0006, +.0008, +.001, +.002, +.003" |
24.00 |
9171A/100 |
Roller bearings; .1875" diameter × .662" long, specify size: std., +.0002, +.0004, +.0006, +.0008, +.001, +.002, +.003" |
24.00 |
9441A/100 |
Roller bearings; .1875" diameter × .294" long, specify size: std., +.0002, +.0004, +.0006, +.0008, +.001, +.0015, +.002, +.003" |
23.00 |
9150A/100 |
Roller bearings; .1875" diameter × .480" long, specify size: std., +.0002, +.0004, +.0006, +.0008, +.001, +.0015, +.002, +.003" |
23.00 |
9186/100 |
Roller bearings; .1875" diameter × .585" long, specify size: std., +.0002, +.0004, +.0006, +.0008, +.001, +.0015, +.002, +.003" |
24.00 |
Part No. |
Have Your Own Cams Re-Ground for More Power
(Click
for Notes)
Attention: questions or orders for cams sent to Victory will not be answered. |
Price |
25505-04R |
Intake Cam Set, 45; mild 278º duration, .318” lift. Click
for motor recommendations & notes. |
135.00 |
25506-04R |
Intake Cam Set, 45; hot 298º/.357”. Click
for motor recommendations & notes. |
135.00 |
25507-04R |
Intake Cam Set, 45; hot 294º/.377”. Click
for motor recommendations & notes. |
135.00 |
25527-04R |
Intake Cam Set, UL; mild 294º/.377”. Click
for motor recommendations & notes. |
135.00 |
25528-04R |
Intake Cam Set, UL; race only 314º/.380”. Click
for motor recommendations & notes. |
135.00 |
25515-04R |
Exhaust Cam Set, 45; 278º/.318”. Click
for motor recommendations & notes. |
120.00 |
25537-04R |
Exhaust Cam Set, UL; 294º/.377”. Click
for motor recommendations & notes. |
120.00 |
Order | To order reground cams, click here: | Order |
